The popcorn ceiling in your home is no longer appealing to you. You can sand it off. This can be an easy, inexpensive and simple way to update the look of your home. There are some key points to remember before you begin. You will finish your project faster and more safely if the tools are right and you use the correct sanding gravel.
To remove ceiling texture, first you need the right tools. The ceiling texture will determine which sanding grade you should use. For painted popcorn, you'll want to use coarse grit. A finer sanding grit may be used if you have a darker texture.
You'll then need a scraper, or putty knife to get rid of any softened texture. Then, you can sand the remaining texture off with a drywall knife or pole sander. Sanding a textured ceiling can make a big mess, so it's best to wear shoe covers or a dust mask to protect yourself from harmful dust and fumes.
After you sand off the popcorn texture, you can go over it with joint compound. Joint compound can be used for smoothing walls and ceilings. The joint compound should dry for approximately 45 minutes. The surface should be lightly sanded with 220-grit sandpaper, before you apply two to three coats.
Alternatively, you can apply a comb texture. This subtle accent can add style to your room. Usually, a comb is laid on in half-fans. This texture can be applied using a toothed towel. When you do, you'll want to be careful to avoid the areas with high points.
If you are considering sanding the texture off of your ceiling, you should check to see if the ceiling has asbestos in it. To stop dust getting into the air registers, you will need to cover them with plastic. Also, check for mold on the ceiling.
Renting a staging system from a rental center can help you sand the ceiling's texture. These units make it easy to reach the ceiling and are also very maneuverable. Additionally, there are many other tools available to aid you.
A company that specializes is removing acoustic ceiling textures can be contacted. They can be found on the Internet or through friends and relatives. Their price quotes will include materials and labor, as well as applicable sales taxes. You might be able do the job yourself, depending on your budget. But hiring a professional will save you time and energy, as well as a whole lot of work.
After you have removed the ceiling's texture, you can paint it flat. It may take several coats of primer and paint to cover it completely, though.
FAQ
How can you remodel a house without spending any money?
When renovating a home without spending money, the following steps should be followed:
-
You should create a budget plan
-
Find out what materials are required
-
Decide where you want to put them
-
You will need to make a list of the things that you must buy.
-
Find out how much money your have
-
Plan your renovation project
-
Start to work on your plans
-
Online research is a good idea.
-
Ask friends and family for help
-
Get creative
What should I do first in a house renovation?
Fixing up a home starts with cleaning out all the clutter from inside and outside. You will need to clean out all moldy areas and repair any leaky pipes. Finally, you'll need to repaint the interior. Finally, you need to clean off the exterior surfaces and apply fresh paint.
Do I require permits to renovate a house?
Permits are required before you can start any home improvement project. You will require a building permit as well as a plumbing permit in most cases. A zoning license may also be needed depending on the type or construction you are doing.
What order should renovations of the home be performed?
You must decide where everything will go when you renovate your home. If you're planning on selling your home soon, it is important to consider how you wish to present your home for potential buyers. The next step is to plan the layout of your living, kitchen, and bathroom. Once you have decided which rooms you want to renovate, you should start looking for contractors who specialize in those areas. Finally, once you have hired a contractor, you should begin working on your renovation project.
Do you prefer to hire a general contractor, or a subcontractor for your project?
Hiring a general contract is typically more costly than hiring subcontractors. A general contractor has many employees, so they often charge their clients a lot of money for labor costs. A subcontractor hires only one employee so they charge less per an hour.
How many times do I need to change my furnace filter?
How often your family expects to use the heating system in their home will determine the answer. You may need to change your filter more frequently if the temperature drops and you plan on being away from home during colder months. But if you do not often go outside, it may be possible to wait longer between changing your filter.
A furnace filter typically lasts for three months. This means that your furnace filters should be changed every three to four months.
You can also check the manufacturer's recommendations for when to change your filter. Manufacturers recommend changing your filter after each heating season. Other manufacturers suggest waiting until visible dirt builds up.
Statistics
- The average fixed rate for a home-equity loan was recently 5.27%, and the average variable rate for a HELOC was 5.49%, according to Bankrate.com. (kiplinger.com)
- They'll usually lend up to 90% of your home's "as-completed" value, but no more than $424,100 in most locales or $636,150 in high-cost areas. (kiplinger.com)
- Design-builders may ask for a down payment of up to 25% or 33% of the job cost, says the NARI. (kiplinger.com)
- On jumbo loans of more than $636,150, you'll be able to borrow up to 80% of the home's completed value. (kiplinger.com)
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
External Links
How To
Do you prefer renovating exterior or interior?
Which one should i do first?
There are many factors that you should consider when choosing the right project. The most important factor to consider is whether the building has been around for a while. If the building is old, then there are many things to take into consideration such as the condition of the roof, windows, doors, flooring, electrical system, etc. There are many aspects to consider when a building is brand new. These include the size and style of the rooms, as well as their location.
If the building is old, the first thing to look at is the roof. If it looks like the roof could collapse any minute now, you may want to start on the renovation. If the roof is fine, then you can move onto the next step. Next, examine the windows. The windows should be inspected for damage or dirt before you do anything else. You can then go through your doors and clean them. If everything looks good, you can start to lay the flooring. It is important that your flooring is strong and stable so that it will not give way no matter what you do. Now you can start to add the walls. Examine the walls carefully to determine if there are any cracks or other damage. If the wall is intact, then you can move to the next step. The ceiling can be finished after the walls have been examined. You should inspect the ceiling to ensure that it can withstand any weight you put on it. If all is well, then you are ready to move on to the next phase of your renovation.
If the building was newly built, you'd probably start with its exterior. Take a look at the outside of your house. Is it maintained well? Is it free from cracks? Does it look great? If it doesn't look good, you need to fix it. You don’t want to make your home look bad. Next, check the foundation. Repairing the foundation is a good idea if it appears weak. Also, inspect your driveway. It should be flat and smooth. If it isn’t then it is time to repair it. You should also inspect the sidewalk while you're checking your driveway. It should be replaced if it is uneven.
These areas should be checked before you move on to the inside. Begin by inspecting the kitchen. Is it clean and well-maintained? If it is unorganized, it should be cleaned. Next, you should inspect the appliances. These appliances should be in top shape and functioning properly. If they aren’t in great shape, then either you buy new ones or replace them. Check the cabinets after this. You can paint them if the cabinets are stained or damaged. If they are in good shape, then you can move to the bathroom. In here, you should check the toilet. If it leaks then it's time to replace it. It's best to wash it if it's only dirty. Next, make sure you inspect all the fixtures. Make sure they are clean. If they are dirty, then you should definitely clean them. Lastly, check the countertops. If the countertops are cracked or chipped, you might want to repaint them. You should seal them if they are shiny and smooth.
Last, check the furniture. Check that nothing is damaged or missing. You should find what is missing if it is not there. If it is damaged, you should probably fix it. After everything has been checked, you can go outside to finish the job.